maritime beacon

A maritime beacon is a device used to mark waterways, obstacles, dangerous areas, etc. It usually consists of a lighthouse, buoys, light floats, light piles, etc., all of which require batteries to provide power. There are several steps to replace the maritime beacon battery:

First, it is necessary to determine the type, location, battery size and quantity of the maritime beacon, as well as the time and method of replacement. Generally speaking, the battery of a marine beacon should be replaced once a year, or when the battery voltage falls below the specified value. The replacement method can be on board the ship or by towing the maritime beacon back to the shore for replacement.

Secondly, you need to prepare the corresponding tools and materials, such as screwdrivers, wrenches, voltmeters, new batteries, waterproof tape, etc., and wear safety protective equipment, such as life jackets, gloves, goggles, etc.

Then, you need to turn off the power switch of the maritime beacon, open the cover of the battery compartment, disconnect the battery cable, take out the old battery, check whether there is contamination or damage in the battery compartment, and clean or repair it if necessary

Next, you need to install a new battery. Pay attention to aligning the positive and negative poles of the battery, connect the battery cables, and use a voltmeter to check whether the battery voltage is normal. If there is any abnormality, adjust or replace it.

After that, you need to close the cover of the battery compartment, seal the gap with waterproof tape, turn on the power switch of the maritime beacon, check whether the working status of the maritime beacon is normal, and troubleshoot or repair if there are any abnormalities.

For more information about  maritime beacon ，welcome to info hzhmaritime com /+86 13360560504 Contact HZH MARINE GROUP